| 1965 Rambler Marlin | |
| Manufacturer | American Motors (AMC) |
|---|---|
| Production | 1965–1967 |
| Assembly | Kenosha, Wisconsin, United States |
| Successor | AMC Rebel/Matador/Ambassador |
| Class | Personal luxury car |
| Body style | Fastback 2-door pillarless hardtop |
| Layout | FR layout |
| Platform | Rambler Classic, AMC Ambassador |
| Designer | Richard A. Teague |
The AMC Marlin is a two-door, mid-sized fastback car made in the United States by the American Motors Corporation (AMC) from 1965 to 1967. A halo model for the company, it was marketed as a personal luxury car.
The fastback roof design was previewed on the 1964 Rambler Tarpon show car, based on the compact Rambler American. 1965 and 1966 model year production Marlins were fastback versions of the mid-sized two-door hardtop Rambler Classic, and 1967 brought a major redesign in which the car was given the new, longer AMC Ambassador full-size chassis. This version had a longer hood and numerous improvements including more interior room and new V8 engines.
Contents |
As consumer per capita income increased in the early 1960s, the U.S. automobile market expanded. Whereas American Motors’ profitable marketing strategy under George W. Romney had concentrated on compact, economical cars, Romney’s successor as CEO, Roy Abernethy, saw larger, more prestigious and luxurious models as a new profit opportunity. The objective was to compete with the ”Big Three” automobile manufacturers (General Motors, Ford, and Chrysler) by expanding AMC’s model lines into additional market segments; particularly by developing a sporty, roomy, 6-passenger[1] sedan that would occupy a unique niche in the market.[2][3] The idea was that the new car would be a distinctive, low-volume model symbolizing a new Rambler look and spearheading a full product line.[3] To be a distinctive competitor in the big league with the Big Three, it was decided that it should be flashy and intermediate-sized,[4] and in an era when other automakers were stressing the power of muscle cars for their intermediate-sized image vehicles, the new model - the Marlin - was to feature comfort and spaciousness.[5]
Initially, in response to a proposal for a sporty youth-oriented car, a four-seat fastback design study, the Rambler Tarpon, had been built on the compact-sized Rambler American platform.[6] This was shown as a concept car at various auto shows but AMC's current "GEN-1" V8 engine would not fit in the comparatively small Rambler chassis; also the new "GEN-II" V8 designs were still in development, and market research showed that a six-cylinder engine alone would not satisfy potential customers.
Ultimately, and in line with Roy Abernethy’s new marketing strategy, the decision was made to build the new fastback model on AMC’s intermediate-sized Rambler Classic platform.[6] The development team, under distinguished American designer Richard A. Teague, had to work with considerably smaller budgets than their counterparts at Detroit's Big Three[7] to create the new Marlin. They created a large, roomy and luxurious fastback which incorporated a number of design features from the Tarpon show car. (The roof was raised over the rear passenger area when Abernethy, who was six-foot-four (193 cm tall), insisted on being able to sit in the back seat of the design studies.)[8] As the car was targeted at the evolving "personal luxury" segment, its long list of standard equipment was supplemented by numerous options that enabled buyers to personalize their Marlins.
| 1966 AMC Marlin | |
| Also called | Rambler Marlin (1965) AMC Marlin (1966) |
|---|---|
| Production | 1965–1966 14,874 built[9] |
| Class | mid-size personal luxury car |
| Engine | 232 cu in (3.8 L) 155 hp (116 kW; 157 PS) I6 2-bbl 287 cu in (4.7 L) 189 hp (141 kW; 192 PS) V8 2-bbl 327 cu in (5.4 L) 250 hp (186 kW; 253 PS) V8 2-bbl 327 cu in (5.4 L) 270 hp (201 kW; 274 PS) V8 4-bbl |
| Transmission | 3-speed manual 3-speed with overdrive "Twin-Stick" on console (1965) 4-speed manual (1966) 3-speed automatic 3-speed “Shift-Command” on console |
| Wheelbase | 112 in (2,845 mm)[10] |
| Length | 195 in (4,953 mm)[10] |
| Width | 74.5 in (1,892 mm) |
| Height | 53 in (1,346 mm) |
| Curb weight | 2,992 lb (1,357 kg) V8 |
| Related | Rambler Classic |
AMC billed the Marlin as a new addition to the company’s self-styled “Sensible Spectaculars” model line. Backed by extensive advertising and merchandising, the car was officially announced on February 10, 1965, and unveiled in Rambler dealer showrooms on March 19.[11]
New car introductions, more significant in the 1960s than today, were often accompanied by special invitations and heavy publicity. The Marlin was advertised in 2,400 newspapers on its launch day,[12] and American Motors' news releases positioned it as aimed at buyers wanting a sporty fastback that was also roomy and comfortable. This contrasted it with the smaller Barracuda and Mustang fastbacks that had arrived a year earlier. AMC’s first model following the muscle car launches of the 1960s, the Marlin was intended to outflank competitors as a product they did not offer - a strategy now called "niche marketing".[13]
It followed signature design features of the Ford Galaxie "Sports Roof", the Plymouth Barracuda, the Mustang 2+2, and the 1965 fastback models from General Motors, including the Chevrolet Impala "Sport Coupe" versions.[14] A book on American muscle cars says V8-powered Marlins provided appropriate performance for the streamlined appearance.[14]
The new model met with a mixed reception in the press.[15] Popular Mechanics magazine recorded 0 to 60 mph in 10.8 seconds by manually shifting the automatic transmission, and fuel economy of 18.14 mpg-US (12.97 L/100 km; 21.79 mpg-imp) at a steady 60 mph (97 km/h).[16] Tom McCahill’s road test in Mechanics Illustrated recorded 0 to 60 mph in 9.7 seconds with the 327 engine.
Motor Trend magazine found the Marlin well balanced and said it added to the market’s various personal performance sports cars. The San Francisco Chronicle praised it and noted effortless cruising at 80 mph (129 km/h)."[15] Hot Rod magazine, which described the car as "weirdly attractive", ran the quarter-mile in 17.43 seconds at 79 mph (127 km/h) with the 327 cu in (5.4 L) and "Flash-O-Matic" transmission.[17]
The Marlin emphasized the stretched-out hardtop (pillar-less) roofline that followed the contemporary styling vogue.[18] Automobile Quarterly magazine thought the car very ugly, and expressed dislike for the inadequacy of the rear-view window, the positions of the steering-wheel and stoplights, the softness of the front seats, and the design of the pedals.[19]
Vincent Geraci (who became chief of product design and product identity at Chrysler after AMC's buyout), viewed the Marlin as "an exciting program ... We took a 1965 body design and turned it into a sportier version. But enlarging the car from its original concept [the Tarpon] and raising the roof produced an adverse effect on overall appearance."[15]
Bob Nixon (who after AMC's buyout in 1987 became Jeep’s design chief at Chrysler) dismissed the project as an "ugly embarrassment" and said that the assignment to create a sporty fastback on the Classic platform was "like trying to build a Corvette on a Buick sedan body. It just doesn't work."[15]
Carl Cameron, designer of the original Dodge Charger, named the Marlin as the only competition for his 1966 car even though, he said, the Marlin lacked some of the Charger’s features and it was "very different". Contrary to the view that the Charger was a "clone" of the Marlin, Cameron said that the starting-point for his design was the fastback 1949 Cadillac, and that any similarity to the Marlin was coincidental. He added that as a result of the exceptionally tall Abernathy's insistence on being able to sit in the Marlin's back seat, "those cars had big squared-off roofs" whereas the Charger's roof treatment was "rounded off, much more pleasing to the eye."[8]
Standard features, which focused on comfort and luxurious appearance, included deluxe exterior trim, individual reclining front seats, front and rear center armrests when bucket seats were selected, and interiors from AMC’s two-door Ambassador model, including dashboard and instrument panel. On the Marlin, the dashboard was trimmed with engine-turned aluminum. Interior door panels were finished with carpeting and stainless steel trim, when many cars at the time had cheaper stamped vinyl glued to cardboard. The reclining bucket seats could be ordered with headrests. The Marlin was also one of the first American automobiles with front disc brakes (four-piston design, by Bendix) as standard. It had drum brakes without servo assistance on the rear.[20]
2,005 Marlins were built with the smallest engine option, a 145 hp (108 kW; 147 PS) 232 I6.[21] The AMC-designed 270 hp (201 kW; 274 PS) 327 cu in (5.4 L) 4-barrel V8, often paired with an automatic transmission that had the shifter in a floor console, accounted for 42% of total production, while less than 6%, regardless of engine option, had the innovative five-speed “Twin-Stick” manual transmission (with overdrive). Other options included "Solex" tinted glass (70% of production), power steering, heavy-duty suspension, "Twin-Grip" limited slip differential, air conditioning, adjustable steering wheel, power windows, and a choice of AM radio or an AM/FM monaural unit (50% of production) with "Duo Costic" rear speaker and "Vibra Tone" system to simulate stereophonic sound (stereo broadcasting was not yet widely available in the U.S.). 221 Marlins were built without a radio. Wide-ranging interior colors and upholstery choices were available, and options for the exterior, including accent colors for the roof and side window trim, enabled further customization.
The MSRP price was US$3,100 (US$21,579 in 2012 dollars[22]), compared with $3,063 for a bench seat (six-passenger) version of the Rambler Classic 770 2-door hardtop, which did not have the extra features and luxurious interior of the Marlin.[23] 10,327 Marlins were sold in the abbreviated first year of production.
The Rambler Marlin became known as the AMC Marlin starting with the 1966 model year. All references to the historic Rambler brand name were removed from the car and promotional materials. This was part of Roy Abernethy’s remake of AMC's corporate identity, divorcing the larger car lines from the Rambler brand and the economy compact car image. The other changes were minor (e.g. a slight modification to the extruded aluminum grille, a front sway bar made standard on six-cylinder models, and an optional black vinyl roof cover that continued over the trunk opening). New was an electronic tach on the top of the dash.[24]
The year also saw the introduction of the fastback Dodge Charger, a derivative of the intermediate-sized Dodge Coronet, and a sporty model in direct response to the Marlin.[25] Together, the Charger and Marlin were "unusual, distinctive and in a class by themselves."[26] General Motors and Ford also positioned products similar to the Marlin as specialized "personal luxury" coupes and introduced 2-door fastback versions of their full- and intermediate-sized car lines.
AMC broadened the car's market appeal by lowering the base price to US$2,601 (US$17,602 in 2012 dollars[22]) and offering more options. For example: high-level trim packages that had previously been standard, as well as the availability of a floor or center console mounted 4-speed manual transmission and a dash-mounted tachometer, affected small changes in pricing and equipment that paralleled the competition. By comparison, Chrysler did a similar thing with the pricing and content of its Dodge Charger from the 1966 to the 1967 model years. Despite these changes, Marlin production fell to 4,547 in 1966.
Popular Science magazine road test comparison of three 1966 sporty fastbacks (Ford Mustang, Plymouth Valiant, and AMC Rambler) highlighted the Marlin's quiet interior, high quality upholstery and positioned seats with adjustable backrests that "permit almost any driver to find an ideal seat-to-wheel-to-pedal relationship", as well as the "best-balanced ride on good roads and bad".[27] The 287 cu in (4.7 L) two-barrel V8 engine with the three-speed automatic achieved 0 to 60 mph in 11.7 seconds, and was the quietest, but least responsive of the group.[27] The test Marlin's standard drum brakes were criticized as inadequate, with the authors recommending the optional disk brakes.[27]
| 1967 AMC Marlin | |
| Production | 1967 only 2,545 built[9] |
|---|---|
| Class | full-size personal luxury car |
| Engine | 232 cu in (3.8 L) 155 hp (116 kW; 157 PS) I6 2-bbl 290 cu in (4.8 L) 200 hp (149 kW; 203 PS) V8 2-bbl 343 cu in (5.6 L) 235 hp (175 kW; 238 PS) V82-bbl 343 cu in (5.6 L) 280 hp (209 kW; 284 PS) V8 4-bbl[28] |
| Transmission | 3-speed manual 3-speed with overdrive 4-speed manual 3-speed automatic 3-speed “Shift-Command” on console |
| Wheelbase | 118 in (2,997 mm) |
| Length | 201.5 in (5,118 mm) |
| Width | 78 in (1,981 mm) |
| Height | 53 in (1,346 mm) |
| Curb weight | 3,342 lb (1,516 kg) V8 |
| Related | AMC Ambassador |
The Marlin was larger and more expensive for the 1967 model year. It was now built on AMC's completely redesigned 118 in (2,997 mm) wheelbase "senior" platform, i.e. the AMC Ambassador chassis. The retooling for 1967 design changes that were mostly to the "senior" line of AMC cars (Ambassador, Marlin, Rebel) cost $35 million.[29] (US$236,862,140 in 2012dollars[22]) The overall length of the new Marlin's body increased by 6.5 inches (165 mm) with more rear seat legroom, as well as being wider resulting in 2.2 inches (56 mm) of additional interior room, but in the process the car gained 350 pounds (159 kg) compared to the previous models.
Making the Marlin larger was a design requirement in anticipation of the 1968 entry of the compact-platform based Javelin. Also the longer, wider car would improve product differentiation among AMC's various model lines. ‘’Motor Trend’’ magazine compared two “Sporty Specialties” – the 1967 AMC Marlin and Dodge Charger – concluded that both are "caught in the middle" because "neither has the compactness of the basic sports-personal archetypes such as the Mustang or Camaro, nor the posh elegance to social climb" to the models such as the Cadillac Eldorado or Buick Riviera.[30] Rather, “both aim at the driver who wants a sporty-type car, but who doesn’t want to give up room and comfort and isn’t ready to move into more expensive category.”[30] The 1967 Marlin was part of the "cool" car sales pie that featured sporty cars with "the popular fastback silhouette".[31]
The Ambassador chassis allowed for a longer hood that harmonized better with its fastback rear end, and the body was given a less angular appearance. A bright trim strip from the door opening to the rear bumper, accentuates the slightly kicked-up "coke bottle" profile of the rear fenders. The front end shared the Ambassador's protruding, vertically stacked headlights and an all-new recessed extruded aluminum grille with horizontal bars that bowed forward in the center. The grille was a black anodized version of the twin (parking and turn-signal) “rally light” grille on the Ambassador DPL models. The hood ornament was redesigned, with a small chrome marlin fish set in clear plastic inside a chrome ring.
The main feature was the Marlin's fastback roof with "stylish elliptical C-pillars that ended "between two stubby, squared-off fins" in the rear.[32] The decklid was the same as on the previous model, but now without the large round insignia. A bigger back window improved rear visibility. New taillights were similar to those on the first-generation car. The rear bumper was slightly different from the one used on the Ambassador and Rebel station wagons, the top edge being a continuous horizontal line that fits up against the body.
Teague said the 1967 car was 'the best-looking Marlin we built.'[15] ‘’Motor Trend’’ magazine described the all-new styling of AMC’s new full-size cars as “attractive” and “more graceful and easier on the eye in ’67.”[33]
The second-generation Marlin did not have its own catalog, but was described within the large Ambassador sales brochure. The Ambassador's standard features and options also came on the Marlin. The interiors continued to offer premium materials and fittings, including wood-grain trim, and were the same as on the Ambassador 990 and DPL two-door hardtop models (with the exception of the “Custom” package that had two matching pillows) that “rival more expensive cars for luxury and quality, yet are durable enough to take years of normal wear.”[33] Many Marlins were ordered with the reclining buckets seats that not only featured a center armrest between them (with a center cushion for a third occupant or a floor console with gear selector), but also a foldaway center armrest for the rear seat. The interior design was new and featured a safety-oriented dashboard with the instruments and controls grouped in front of the driver, while the rest of the dash was pushed forward and away from the passengers. Protruding knobs and controls were eliminated from any area that the passenger or driver could strike them. The steering wheel was smaller than used before and the column was now designed to collapse under impact. A new lance change feature was made standard.[34]
An entirely new family of V8 engines was offered. The six-cylinder was still available, but rarely ordered -only 355 were built. The base V8 was the 290 cu in (4.8 L) with a 2-barrel carburetor, while a pair of 343 cu in (5.6 L) V8s were optional: a 2-barrel that ran on regular-fuel, as well as a high-compression (10.2:1) premium-fuel version with a 4-barrel carburetor and dual exhaust that produced 280 hp (209 kW; 284 PS) at 4800 rpm and 365 foot-pounds (495 N·m) of torque at 3000 rpm. An entirely new four-link, trailing-arm rear suspension system was introduced eliminating the previous torque tube design.
Motor Trend magazine’s road test of the Marlin with the 343 engine reported zero to 60 mph in 9.6 seconds, and ran a 17.6-second quarter mile at 82 mph (132 km/h) with two passengers aboard, which was comparable to the performance of a Dodge Charger with a 383 cu in (6.3 L).[30] Fuel economy with the 280 hp V8 averaged 15.3 mpg-US (15.4 L/100 km; 18.4 mpg-imp) city and 17.6 mpg-US (13.4 L/100 km; 21.1 mpg-imp) highway, while with the 155 hp straight-six the big Marlin averaged 17.3 mpg-US (13.6 L/100 km; 20.8 mpg-imp) city and 20.4 mpg-US (11.5 L/100 km; 24.5 mpg-imp) highway. The Marlin “also handled well” and featured reclining seats that are “well worth the extra $44.65 to anyone who travels long distances.”[30]
Sales of the redesigned Marlin fell to 2,545.[32] This was partly a result of customers' diminishing confidence in the financial health of the automaker under Abernethy's leadership, and partly confusion caused by AMC's move away from its loyal "economy" customer market segments into segments dominated by the domestic "Big Three" (GM, Ford, and Chrysler).[35] Also, buyers did not turn to the "family"-sized fastbacks. Therefore the Marlin ceased production at the end of the '67 model year.[36]
The Marlin "was an overlooked performer on the muscle car landscape",[5] yet it was campaigned without factory support in motorsport venues. Roy Abernethy had instituted a prohibition on automobile racing and he was opposed to corporate sponsorship of activities that glamorized speed and performance.[37] While the Big Three automakers in the U.S. were focusing on high performance during the early 1960s, AMC ran advertising that said: "Why don't we enter high-performance Rambler V-8s in racing? Because the only race Rambler cares about is the human race."[38][39] Nevertheless, the 1965 Marlin was an attempt to attract younger customers. The Marlin was promoted as an image-breaking model and AMC dealerships began sponsoring Ramblers in auto racing.
Preston Honea achieved drag racing fame with the "Bill Kraft Rambler". The effort began in 1964 when the Bill Kraft Rambler dealership had installed a highly modified AMC Ambassador V8 engine (the 327 V8 bored out to 418 cu in (6.8 L), four carburetors, special intake manifold) in a 1964 Rambler that ran 112 mph (180 km/h) at the Fontana drag strip.[40] For the 1965 season, Kraft built a new "Bill Kraft Rambler", this time a fastback-bodied Marlin Funny Car on alcohol fuel and nitrous injection. The AMC engine was replaced by a Plymouth Hemi.[41] On its first time out, the Hemi-powered car ran a 10.31-second quarter mile at 138 mph (222 km/h).[42][43]
Roy Haslam, a 1999 inductee to Victoria Auto Racing Hall of Fame, raced his AMC Marlin Super Stock (image) in Canada and the U.S. He won the July Cup and was 3rd in the season point championships.[44]
Brothers Larry and Don Hess raced a Marlin in the 1966 24 Hours of Daytona.[45] Sponsored by Queen City Rambler, a Charlotte, North Carolina AMC dealership, the car ran almost stock, even a with radio antenna. The passenger seats were removed, a roll bar installed, and the factory exhaust system replaced with open headers that exited below the doors.[45] The Marlin retired after 80 laps with overheating and steering problems,[46] and was reportedly sold as a used car after the race.[45]
American Motors designers and stylists made two operational show cars. Both used the platform of the first generation Marlin and promoted Rambler's new emphasis on luxury and glamour.[11]
A design experiment in 1966 was the manufacture of a first-generation Marlin with the front end of the Ambassador.[6]
A 1966 Marlin was chosen by George Barris, one of the best-known designers of custom cars in the world, to promote road wheels by Rader, which also supplied the custom wheels (commonly known as "mags" or magnesium alloy wheels) for the Batmobile used in the 1960s Batman TV series.[51] Later George Barris worked with AMC to produce dealer installed customizing kits for the AMX.[52]
The intermediate-size fastback car was not a big hit in the marketplace.[36] However, "there were many who welcomed the new breed of mid-size fastbacks as a breath of fresh air."[54] According to Consumer Reports, these cars defied "the usual guidelines to size and price class, and they cannot be measured against any standard".[55]
The Marlin had low sales overall but generated publicity and excitement, attracting potential customers to AMC dealers and creating sales opportunities for other models. American Motors' claim to fame was as a maker of economical and undistinguished compact cars and the publicity and interest generated by the Marlin's rather radical design facilitated a shift in public opinion about the automaker, as well as the contribution margin to the company's sales. The Marlin's first-year sales helped generate a profit of US$5.2 million (US$36,196,402 in 2012dollars[22]) for AMC in fiscal 1965, despite a three-week strike by the United Auto Workers.[56]
The mid-sixties automobile market in the U.S. was marked an increasing influence of younger buyers who wanted a sporty image.[57] Most of the "sportiness" of these was due to effective marketing.[58] No longer satisfied with "standard" cars the market moved into new segments that included muscle models and personal-luxury cruisers.[57] Many were heavily restyled derivatives of volume models and shared common parts. Moreover, they were image builders and big profit generators for their automakers. The objective of the Marlin was to move AMC in this direction. However, the AMC "had an established image as an expert in the small-car field", and thus faced problems in marketing the Marlin as a sporty big car.[57] Moreover, "the Marlin actually represented a double leap" for AMC: into performance, as well as personalization.[57] The model had a good start, but sales quickly bottomed out in the 1967 model year. The automaker's anti-racing philosophy turned around after $40 million (US$270,699,588 in 2012dollars[22]) was spent to develop a new V8 engine family and AMC turned to "competitive events as a means of knocking down its avidly gathered reputation for economy."[29]
Although the Marlin was discontinued in 1967, it paved the way for a successful replacement—the compact 1968 AMC Javelin. Therefore, the Marlin’s introduction in 1965 can be viewed as stopgap marketing move by AMC, influenced by the company’s lack of a V8 engine at that time to fit the compact Rambler chassis. As a mid-sized car, the Marlin was not a dashing, affordable pony car, and after three years of production, it would "step aside in favor of another two-door: the hip, new Javelin."[59]
A Marlin was the subject of political controversy in Republican candidate Mitt Romney's 2002 Massachusetts gubernatorial election campaign.
In a television advertisement Romney and his wife Ann tenderly describe their first date and falling in love. Mrs. Romney recalls her husband pulling up in "some goofy-looking car" and running out of gas on the way home. Romney describes being embarrassed by the fact that in high school he drove a car that he says was "kinda awful."[60]
What Romney did not say in the ads was that the car was a brand new AMC Marlin, from the company headed by his father George W. Romney.[61]
The rival Shannon O'Brien campaign responded that Romney "actually drove a cool car"—a "personal luxury car" according to AutoWeek magazine. The press release by the Democratic ticket chided: "...the fact that Mitt Romney was embarrassed by his brand new car shows just how out of touch with regular working people he is."[62]
Some of the main design components of the Marlin's design returned in 2004 with the Chrysler Crossfire. The new coupé displayed a fastback roof with broad rear fenders, a rear end treatment that prompted many automotive journalists to comment on the Crossfire's resemblance to the AMC Marlin. For example, Rob Rothwell wrote '...when I first espied the rear lines of the Chrysler Crossfire I was instantly transported back to 1965 and my favorite car of that year, the Rambler Marlin.'[63]
The distinctive Marlin has found a niche among old car hobbyists and collectors of historic vehicles as evidenced by the backing of enthusiasts with a single marque antique auto club.[64] Although a relatively low-production model, the Marlin is a derivative of AMC's higher-volume models so it shares many common parts. Vehicles in various stages of appearance and mechanical condition can be found for sale. Plusses for collectors of the 1965 model include decent performance with optional drivetrains, historical oddity, plush, bucket-seat interior, and its still low prices; while the Marlin's "distinctive" styling, rust issues, and slow appreciation in value are minuses.[65]
There are also many active local and national (U.S. and other nations) Rambler and AMC car clubs that welcome Marlins.
A unique conversation piece and collectible is the 1966 AMC Marlin that was transformed into a top-less "convertible" by cutting off the car's roof.[66] It was made for the Florida Marlins, a professional baseball team based in Miami Gardens, Florida. The one-of-a-kind car served in parades and on-field ceremonies at Dolphins Stadium. With no seats except for the driver, it transported the team's mascot "Billy the Marlin" for all fans to see during the ball club's 1997 world championship season.[67]
A highly detailed Marlin promotional 1/25-scale model was manufactured under license from AMC by Jo-Han for the 1965 and 1966 model years. The only differences are their grilles and removal of the Rambler name on the 1966s. A friction model was also available from Jo-Han in 1966.[68] Although available in a variety of single and two-tone color combinations, many of these "dealer promos" were done in aqua/dark blue two-tone plastic. Unwanted by AMC dealers as the 1966 model year neared its end, thousands of the models were given away to institutions such as children's hospitals and orphan's homes. They are now highly desirable and they command premium prices.[11] Their value can be upwards of $200 to 400 for mint, in-the-box specimens that still have the hood ornament.[69]
Jo-Han also produced 1/25-scale plastic kits of the 1966 Marlin,[70] (Jo-Han C1900) and reissued it in the mid-1970s in the “U.S.A. Oldies” series Image (Jo-Han C-3666).[68] They are based on the promotional models, but are less valuable today. According to Steve Magnante of Hot Rod magazine, Jo-Han appears to be poised for a comeback with its most famous unassembled model kits favoring offbeat subjects, "but save up-this stuff is pricey."[71]
Two types of die-cast toy models were sold under the Corgi Toy brand and manufactured by Mettoy Playcraft in the UK during the late 1960s. Both were done in 1:48 scale. One was a two-tone red and black Marlin with opening doors and a tow hook.[72] The "Rambler Marlin Sports Fastback" (Corgi 263) scale model was released in 1966 and withdrawn from the market in 1969.[72] In addition to the two-tone paint with chrome bumpers and grille, the model features a detailed interior finished in white and the front seat backs can be tiped forward (as in the actual cars).[72] The second was a gift boxed set (Corgi GS10) with the Marlin finished in blue with a white roof and featuring a roof rack for a kayak, as well as towing a matching utility trailer with opening hatches.[73] Released in 1968, this set had a short run of just 11 months.[74]
The following is a digest of a section in "The Marlin Handbook - 2004" prepared by the Marlin Auto Club.
Front fenders, hood, as well as front and rear bumpers are interchangeable with the 1965 and 1966 Classic. The rear bumper from 1965 and 1966 Ambassadors will interchange, as well as the dashboard, seats, and other inside trim pieces. Windshields and the doors with their side glass are interchangeable with all two-door Classic and Ambassador models.
Drive train, front and rear suspension, brakes, radiators, master cylinders, trunnions, steering columns, power steering pumps, engines, transmissions, brake drums and rotors are interchangeable with 1965 and 1966 Ambassadors and Classics. Some parts are even interchangeable back to 1958 and earlier, while other components were used by AMC into the 1970s.
The 232 cu in (3.8 L) I6 was used through the late-1970s. This engine was stroked and became the 258 cu in (4.2 L) that was used into the 1990s in Jeeps. Many engine components are shared. This engine was also upgraded into Jeep’s 4-liter workhorse. It is possible to transplant this high-output fuel-injected engine into a Marlin. (See: AMC Straight-6 engine)
The 287 cu in (4.7 L) and 327 cu in (5.4 L) V8s started out in 1956 and 1957 and were used in large Ramblers, Classics, and Ambassadors through 1966. The AMC 327 engine continued to be used in Jeep and marine applications into the mid-1970s. (See: AMC V8 engine)
Front fenders, hood, front bumper, are interchangeable with all 1967 Ambassadors. Windshields as well as doors and their glass from all two-door Ambassadors and Rebels are also interchangeable.
The 1967 Marlin similarly shares most major mechanical components with 1967 and up "senior" (Ambassador, Rebel, and Matador) models. The front suspension design was changed in 1970; however, brake components are interchangeable with later models. Mechanically, the track width for 1967, as well as 1968, was 58.5 in (1,486 mm). Starting in 1969 this was increased to an even 60 in (1,524 mm). In spite of the track width increase, the rear axle uses the same mounting points and spring locations. Therefore, complete rear-end assemblies from later models “bolt in” with some minor exceptions such as the different drive shaft rear universal joint sizes compared to those used in 1967.
Starting with the 1967 model year, completely new "GEN-II" V8 engines were used in all AMC vehicles. In 1968, the high-performance 390 cu in (6.4 L) V8 was added. Then in 1970 and 1971 the 290 became the 304 cu in (5.0 L), the 343 became the 360 cu in (5.9 L), while the 390 became a 401 cu in (6.6 L). Many of the V8 parts are interchangeable with the 290 and 343. All "GEN-II" engines fit into the second generation Marlin.[75] American Motors' V8 engines were used through 1991 in the full-size Jeep Wagoneer.
|
|||||||||||||||||||||||||||||||||||
| Type | 1950s | 1960s | 1970s | 1980s | |||||||||||||||||||||||||||||||
| 4 | 5 | 6 | 7 | 8 | 9 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
| Subcompact | Gremlin | Spirit | Encore | ||||||||||||||||||||||||||||||||
| Compact | Rambler | Rambler American | Hornet | Concord | |||||||||||||||||||||||||||||||
| Jet | Pacer | Alliance | |||||||||||||||||||||||||||||||||
| Mid-size | Rambler Six and V8 | Classic | Rebel | Matador | |||||||||||||||||||||||||||||||
| Rebel V8 | Marlin | Matador Coupe | |||||||||||||||||||||||||||||||||
| Full-size | Nash Ambassador | Ambassador | Premier | ||||||||||||||||||||||||||||||||
| Hudson Hornet | |||||||||||||||||||||||||||||||||||
| Sports | AMX | AMX | GTA | ||||||||||||||||||||||||||||||||
| Javelin | |||||||||||||||||||||||||||||||||||
| Crossover | Eagle | ||||||||||||||||||||||||||||||||||
| SUV | see early timeline of Jeep models | see late timeline of Jeep models | |||||||||||||||||||||||||||||||||
| Captive import | Metropolitan | LeCar | |||||||||||||||||||||||||||||||||
| N-H | Renault 18i/Sportwagon | Medallion | |||||||||||||||||||||||||||||||||
| Fuego | |||||||||||||||||||||||||||||||||||
| Military vehicles | Mighty Mite | AM General trucks, Jeeps, and the Humvee | |||||||||||||||||||||||||||||||||
